Electric gate Valve manufacturer in China
Our Longz electric actuator drives the gate plate to open or close the flow channel, making the valve suitable for pipeline isolation. The actuator torque, voltage, control signal, and valve body material should be selected based on the pipeline operating conditions. It is widely used in fields such as petroleum, chemical industry, and natural gas, suitable for various working conditions, including the transport of oil products, steam, and gases.
The application scenarios of electric gate valve

In the chemical industry, our electric gate valve is capable of handling corrosive, toxic and flammable media. It can be customized according to the medium data to achieve safe and reliable isolation.

In the natural gas industry, our electric gate valves for transportation and urban gate stations offer low-emission isolation capabilities, full-port metal sealing surfaces. They also meet the demands for high-pressure gas and liquefied natural gas (LNG) services.

In the oil industry, our electric gate valve can achieve reliable remote isolation between the wellhead, gathering pipelines and refineries. With a hard-faced inner liner and a valve body cast from WCB, ASTM A217 WC6 or ASTM A217 WC9, the valve is engineered for crude oil, acidic media and thermal-cycling service. The explosion-proof multi-turn actuator ensures safe operation in hazardous areas.
Engineered Electric Actuation — Precision You Can Specify
What you need from an electric gate valve is reliable shut-off, stable regulation, and reduced maintenance downtime. This section revolves around these achievements. Our electric gate valves respond quickly and predictably. From the control room to the operator workstation, it can immediately respond to remote dispatching, SCADA interlocks, and safety shutdown signals. Therefore, when processes change or an emergency shutdown is triggered, you can fully rely on its automation and protection logic. This electric gate valve provides precise and repeatable positioning. The servo amplifier continuously compares the commands with real-time position feedback, driving the motor only when a deviation occurs. The gatekeeper precisely maintains the position you set, thereby reducing energy consumption while avoiding issues of shortened motor lifespan caused by frequent start-stop cycles.

Your Trusted electric gate valve supplier in China


What you need from an electric gate valve is reliable shut-off, stable regulation, and reduced maintenance downtime. This section revolves around these achievements. Our electric gate valves respond quickly and predictably. From the control room to the operator workstation, it can immediately respond to remote dispatching, SCADA interlocks, and safety shutdown signals. Therefore, when processes change or an emergency shutdown is triggered, you can fully rely on its automation and protection logic. This electric gate valve provides precise and repeatable positioning. The servo amplifier continuously compares the commands with real-time position feedback, driving the motor only when a deviation occurs. The gatekeeper precisely maintains the position you set, thereby reducing energy consumption while avoiding issues of shortened motor lifespan caused by frequent start-stop cycles.

Our flange gate valve ensures a reliable shut-off and reduces the risk of leakage. The gate plate forms a tight sealing pair with the valve seat, allowing for clear results during isolation, switching, and pre-examination shutdowns. This helps your pipeline meet safety and environmental management requirements, and also reduces the risk of personnel and downstream equipment being exposed to the medium. Connection or disconnection of the pipeline.

Our longz model flat gate Valve adopts an O-ring sealing and a floating valve seat structure with pre-tightening force, enabling bidirectional sealing at both the inlet and outlet of the valve. Moreover, the opening and closing torque of this structure is only half that of ordinary valves, allowing for effortless opening and closing of the valve.

Our Soft Sealed Gate Valve has a flow channel without any grooves at the bottom, which does not accumulate impurities. There is no need for slag removal and it is maintenance-free. The valve body design with no grooves at the bottom of the flow channel can effectively save the installation height space and greatly prevent the valve seal from being affected by the impurities at the bottom and causing leakage.
Flange Gate Valve
- certificate
- Size Chart for Electric Gate Valves
| DN | L | D | D1 | D2 | b | f | H | Electric device |
|---|---|---|---|---|---|---|---|---|
| PN16 | ||||||||
| 40 | 200 | 150 | 110 | 84 | 18 | 2 | 595 | DZW15 |
| 50 | 250 | 165 | 125 | 99 | 20 | 2 | 653 | DZW20 |
| 65 | 270 | 185 | 145 | 118 | 20 | 2 | 665 | DZW20 |
| 80 | 280 | 200 | 160 | 132 | 20 | 2 | 725 | DZW20 |
| 100 | 300 | 220 | 180 | 156 | 22 | 2 | 787 | DZW20 |
| 150 | 350 | 285 | 240 | 211 | 24 | 2 | 955 | DZW30 |
| 200 | 400 | 340 | 295 | 266 | 24 | 2 | 1105 | DZW30 |
| 250 | 450 | 405 | 355 | 319 | 26 | 2 | 1343 | DZW45 |
| 300 | 500 | 460 | 410 | 370 | 28 | 2 | 1516 | DZW60 |
| 350 | 550 | 520 | 470 | 729 | 30 | 2 | 1678 | DZW60 |
| 400 | 600 | 580 | 525 | 480 | 32 | 2 | 1849 | DZW90 |
| 450 | 650 | 640 | 585 | 548 | 40 | 2 | 1937 | DZW90 |
| 500 | 700 | 715 | 650 | 609 | 44 | 2 | 2234 | DZW120 |
| 600 | 800 | 840 | 770 | 720 | 48 | 2 | 3432 | DZW180 |
| 700 | 900 | 910 | 840 | 794 | 50 | 5 | 2489 | DZW250 |
| 800 | 1000 | 1025 | 950 | 901 | 52 | 5 | 2643 | DZW350 |
First, determine the four basic parameters of the pipeline, such as diameter, pressure grade, medium and temperature. Then, based on these parameters, select the valve body material, connection method and actuator type. The diameter and pressure grade determine the structure of the valve body’s pressure-bearing components, the medium and temperature determine the material of the internal components and the sealing form, and the actuator is selected based on the required output torque and opening/closing time.
No. The electric gate valve is a type of cut-off valve and is only used for full opening and full closing. It is prohibited for use in throttling regulation. Long-term partial opening for throttling will cause erosion, vibration and damage to the sealing surface of the gate plate and valve seat.
The electric gate valve must be installed vertically, with the gate plate moving direction perpendicular to the ground, the pipeline axis aligned with the valve axis, the bolts evenly tightened symmetrically and in a diagonal sequence, and the torque meeting the standards.






